On Site Machining
Go back
HSOS Industrial Services logo
HSOS Industrial Services

On Site Machining

HSOS-flenzen-repareren
FLANGE REPAIR

Flange (gasket) surfaces that are damaged due corrosion or welding etc, can be repaired with Silk facing equipment.
Gaskets, made from various materials are used to assure that the closure of flanged connection is correct.
To make sure that the gasket is optimally efficient, we must ensure that the flanges are machined. These machining tolerances are to be equivalent to the specific dimensions and tolerances of the gasket.
The more common flange types are:

  • Raised face (RF)
  • Full Face (FF)
  • Ring Type joint (RTJ)

At HSOS Industrial Services we also sell and rent out this equipment. Please visit the “Rental” page.

FLANGE REPAIR

Flange (gasket) surfaces that are damaged due corrosion or welding etc, can be repaired with Silk facing equipment.
Gaskets, made from various materials are used to assure that the closure of flanged connection is correct.
To make sure that the gasket is optimally efficient, we must ensure that the flanges are machined. These machining tolerances are to be equivalent to the specific dimensions and tolerances of the gasket.
The more common flange types are:

  • Raised face (RF)
  • Full Face (FF)
  • Ring Type joint (RTJ)

At HSOS Industrial Services we also sell and rent out this equipment. Please visit the “Rental” page.

HSOS-flenzen-repareren
HSOS-frezen
MILLING

Milling is a machining operation using a rotary milling cutter. Milling is an operation that is very prevalent in the metal industry. Milling can be carried out on location with a mobile milling machine for the milling of foundations,  tracks and rails to any desired specification.
These machines are electrically, pneumatically or hydraulically driven.

MILLING

Milling is a machining operation using a rotary milling cutter. Milling is an operation that is very prevalent in the metal industry. Milling can be carried out on location with a mobile milling machine for the milling of foundations,  tracks and rails to any desired specification.
These machines are electrically, pneumatically or hydraulically driven.

HSOS-frezen
borenentappen3
DRILLING AND TAPPING

Drilling holes or ‘thread tapping’ on site i.e.: building sites, shipyards, constructions and installations. Drilling up till 150 diameter, is possible with the use of a portable magnetic drill. Holes can be drilled either straight or at a desired angle in pipelines, apparatus or constructions in every desired diameter. Holes can be drilled either straight or at a desired angle in pipelines, apparatus or constructions in every desired diameter. Holes in machinery can be achieved with a line-drill.

LINE BORING

This machining technique can be used on any desired location, offshore or onshore. When hinged fittings are worn or they are undersized we can drill these to the required dimensions. Turning shaft and rudder shafts will be measured and drilled to the required dimensions. When line drilling only tolerances of precisely 0.00mm to 0.04mm can be used The markets where we do most of our work are, among others: construction and reparations of ships,  cranes, bridges, construction parts and digging machines. Activities are performed on location as it is not always possible to move the activities to a machining factory or the transport costs are so high that it saves money to line drill on site. In both cases the line drill travels to the job instead of bringing the job to the drill.

DRILLING AND TAPPING

Drilling holes or ‘thread tapping’ on site i.e.: building sites, shipyards, constructions and installations. Drilling up till 150 diameter, is possible with the use of a portable magnetic drill. Holes can be drilled either straight or at a desired angle in pipelines, apparatus or constructions in every desired diameter. Holes can be drilled either straight or at a desired angle in pipelines, apparatus or constructions in every desired diameter. Holes in machinery can be achieved with a line-drill.

LINE BORING

This machining technique can be used on any desired location, offshore or onshore. When hinged fittings are worn or they are undersized we can drill these to the required dimensions. Turning shaft and rudder shafts will be measured and drilled to the required dimensions. When line drilling only tolerances of precisely 0.00mm to 0.04mm can be used The markets where we do most of our work are, among others: construction and reparations of ships,  cranes, bridges, construction parts and digging machines. Activities are performed on location as it is not always possible to move the activities to a machining factory or the transport costs are so high that it saves money to line drill on site. In both cases the line drill travels to the job instead of bringing the job to the drill.

borenentappen3
HSOS-vonkverspanen
SPARK EROSION

In the metal industry, various machining techniques are available. The more well-known techniques are, milling, cutting and grinding. Spark erosion is also a machining technique which uses a spark transfer to remove material. The removed material however is so small that it cannot be compared to the amount of material removed through other techniques such as cutting. At HSOS Industrial Services we only use a Eromobil Spark, using this we can bore or tap apparatus and motors without damaging the threads. It is also possible to erode broke bolts by using a square electrode first and a socket second.

SPARK EROSION

In the metal industry, various machining techniques are available. The more well-known techniques are, milling, cutting and grinding. Spark erosion is also a machining technique which uses a spark transfer to remove material. The removed material however is so small that it cannot be compared to the amount of material removed through other techniques such as cutting. At HSOS Industrial Services we only use a Eromobil Spark, using this we can bore or tap apparatus and motors without damaging the threads. It is also possible to erode broke bolts by using a square electrode first and a socket second.

HSOS-vonkverspanen
HSOS-pijp-snijden
PIPE CUTTING

For cold cutting, beveling of welding preps and tapering of the inside diameter of piping and or components we us ‘clamshells’ ranging from 2″ to 110″ diameter. The Clamshell is a series of machines with high versatility for a variety of applications. With these machines you have no heat or spark formation, meaning you have no ignition source and therefore no explosion risk. With little effort, a pipe can be cut straight and tapered or welding bevel in any desired form can be achieved. This range of machines has a variety of tools suitable for complex pieces such as a lack of space. For example: front, side and rear mountable motors, low and high profile tool holders for both standard and special tools. These clamshells can be drive electrically, hydraulically or pneumatically. The full range covers from 63mm (2″) till 2794mm (110″). The pipe cutting equipment as well as cutting consumables are for sale and rent, training can also be provided.

PIPE CUTTING

For cold cutting, beveling of welding preps and tapering of the inside diameter of piping and or components we us ‘clamshells’ ranging from 2″ to 110″ diameter. The Clamshell is a series of machines with high versatility for a variety of applications. With these machines you have no heat or spark formation, meaning you have no ignition source and therefore no explosion risk. With little effort, a pipe can be cut straight and tapered or welding bevel in any desired form can be achieved. This range of machines has a variety of tools suitable for complex pieces such as a lack of space. For example: front, side and rear mountable motors, low and high profile tool holders for both standard and special tools. These clamshells can be drive electrically, hydraulically or pneumatically. The full range covers from 63mm (2″) till 2794mm (110″). The pipe cutting equipment as well as cutting consumables are for sale and rent, training can also be provided.

HSOS-pijp-snijden

Copyright © 2019 HSOS Industrial Services | Conditions | Site-Index | Cookies | Privacyverklaring | All rights reserved | Sitemap

Designpro.nl | Z-IM